VACU/POWER 300+
The TGT VACU/POWER 300+ battery-powered suction system is an ideal aid for glaziers, window fitters, carpenters, and metalworkers.
Unrivaled Control
Whether in production or on the construction site. It enables narrow workpieces with gastight surfaces, such as doors, glass panes, metal sheets, etc., to be held and inserted without torsion. The VACU/POWER can be turned 360° and tilted 90°.
The system is equipped with four suction cups and a 12-volt vacuum system and can carry a load of 300kg. Of course, it is made as a dual-circuit system in accordance with EN 13155. Two suction cups can be added to the system as needed, thereby increasing the payload to 450kg.
VACU/POWER 400
The TGT VACU/POWER 400 battery-powered suction system is an ideal aid for glaziers, window fitters, carpenters, and metalworkers, as well as on construction sites
Unrivaled Control
It holds elements very securely while at the same time reducing wear and tear by exerting suction over a large area. It is equipped with six to ten suctions cups whose wide rubber edges have enormous holding power and also have no problem holding high profiles in place.
Incl. 12-volt dual-circuit vacuum system in accordance with EN 13155, manual pivoting device (90° horizontally and rotates 360°) and trolley.
VACU/POWER 450A
It can be sued to hold and insert all flat workpieces with a gastight surface, such as doors, glass panes, metal sheets, etc. without damage.
Unrivaled Control
Thanks to the manual swivel (turning 360° and rotating 90° horizontally) you can accurately position elements. Incl. dual circuit system in accordance with EN 13155, charger, safety tank, and voltmeter.
The carrying capacity of the VACU/POWER ranges between 300 and 450kg, depending on the number of suction cups.
VACU/POWER 600A
The TGT VACU/POWER 600A battery-powered suction system with its manual swivel (turns 360° and rotates 90° horizontally) is an ideal aid for glaziers, window fitters, carpenters, metalworkers and on the construction site.
Unrivaled Control
It can hold and insert elements with a gastight surface, such as doors, glass panes, metal sheets, etc. without damage. The carrying capacity of the VACU/POWER ranges between 300 and 600kg max. depending on the number of suctions cups.
Made as dual-circuit battery-powered system in accordance with EN 13155, incl. vacuum tank and voltmeter.
VACU/POWER 900
The TGT-VACU/POWER 900 comes in various performance categories and models, as well as with payloads from 450kg to 900kg.
Unrivaled Control
This suction system is an ideal aid in production as well as on construction sites. It can lift and insert elements with a gastight surface, such as doors, glass panes, metal sheets, etc. without damage by exerting suction over a large area.
Lifting with the battery-powered suction system is efficient, reduces wear and tear, requires little effort, is low in price and safe, without scratching the surface of the pieces being transported.
REQUEST A QUOTE NOW!
The Team at Spimerica Spider Access Equipment is here to help with all of your Aerial Work Platform, Boom Lifts, Spider Platforms & Specialty Equipment needs across North America. Fill out the information below and a member of the Spimerica Team will be in contact with you shortly!
EXPLORE ALL SOLUTIONS
Spimerica is equipped to handle major industry sectors across North America. View our Industry Solutions & explore Spimerica's full line of Aerial Work Platforms & Specialty Equipment.